| -- Creceed -- |
 | Ionizer
Blow type, Fan Type and Air Gun style ionization products for the removal of static electricity from a part, assembly or workspace. These products help safeguard fragile electronics from the detrimental effects of static electricity. In packaging applications, ionizers can assist in the prevention of product clumping due to static which can make dispensing into bags or boxes difficult.
Product Page ... |
 |
| -- Filters and Regulators -- |
 | FRN Series
Miniature filter regulator combination units
Product Page ... |
|
 | HRS100 and HPRS100
Stainless pressure regulators. Standard and precision types. 1/8 or 1/4 pipe size.
Product Page ... |
|
 | PR Series
Precision regulators.
Product Page ... |
|
 | VR Series
Vacuum regulators and gages. 1/8 and 1/4 pipe sizes.
Product Page ... |
|
| -- Fittings -- |
 | Mini Quick Connect Series
A complete series of fittings for 1.8 mm diameter tubing
Product Page ... |
|
| TAC Minature Fittings
A highly versatile line of air valves operated by pilot or mechanical operators or manually by their push-buttons. Each push-button's shoulder bottoms-out on the valve body to prevent overstroke and valve damage. Operators adapt directly to the threaded button end. Port sizes are as follows: TAC, #10-32; TAC2, 1/8-inch; TAC3 , 1/4-inch
Product Page ... |
|
| -- Mufflers -- |
| KM Series
Reduces sound (noise) of exhausting air.
Product Page ... |
|
| -- Block Cylinders -- |
 | HJDA
Wide range of bore sizes 1/2" to 4". Unique body allows sensor switches to be mouted on 3 different sides when magnet type is required. Four different sensor switches available including hall effect or reed types, and indicator light (LED). Other options include bumpers, viton seals, male rod thread or no rod thread, pivot mount, foot mount, and flange mount.
Product Page ... |
|
| HJDAD
Double Rod end. Wide range of bore sizes 1/2" to 4". Unique body allows sensor switches to be mouted on 3 different sides when magnet type is required. Four different sensor switches available including hall effect or reed types, and indicator light (LED). Other options include bumpers, viton seals, male rod thread or no rod thread, foot mount, and flange mount.
Product Page ... |
|
| HJDAL
Double Acting. The square rod style accomplishes the non-rotating function in an extremely simplified design. The square rod eliminates the need for rod end quide blocks or internal guide pins common to double acting, non-rotating cylinders. Wide range of bore sizes 3/4" to 2 1/2". Unique body allows sensor switches to be mouted on 3 different sides when magnet type is required. Four different sensor switches available including hall effect or reed types, and indicator light (LED). Other options include bumpers, male rod thread or no rod thread, foot mount, and flange mount.
Product Page ... |
|
| HJDAT
Double Acting. Tandem cylinder is constructed from two block cylinders joined end to end. Wide range of bore sizes 1/2" to 4". Unique body allows sensor switches to be mouted on 3 different sides when magnet type is required. Four different sensor switches available including hall effect or reed types, and indicator light (LED). Other options include bumpers, viton seals, male rod thread or no rod thread, foot mount, and flange mount.
Product Page ... |
|
| HJDAW
Double Acting. Tandem cylinder is constructed from two block cylinders joined end to end. Wide range of bore sizes 1/2" to 4". Unique body allows sensor switches to be mouted on 3 different sides when magnet type is required. Four different sensor switches available including hall effect or reed types, and indicator light (LED). Other options include bumpers, viton seals, male rod thread or no rod thread, foot mount, and flange mount.
Product Page ... |
|
| HJSA
Wide range of bore sizes 1/2" to 2". Unique body allows sensor switches to be mouted on 3 different sides when magnet type is required. Four different sensor switches available including hall effect or reed types, and indicator light (LED). Other options include bumpers, viton seals, male rod thread or no rod thread, foot mount, and flange mount.
Product Page ... |
|
| HJSAD
Wide range of bore sizes 1/2" to 2". Unique body allows sensor switches to be mouted on 3 different sides when magnet type is required. Four different sensor switches available including hall effect or reed types, and indicator light (LED). Other options include bumpers, viton seals, male rod thread or no rod thread, foot mount, and flange mount.
Product Page ... |
|
| HJSAT
Single Acting. Tandem cylinder is constructed from two block cylinders joined end to end. Wide range of bore sizes 1/2" to 2". Unique body allows sensor switches to be mouted on 3 different sides when magnet type is required. Four different sensor switches available including hall effect or reed types, and indicator light (LED). Other options include bumpers, viton seals, male rod thread or no rod thread, foot mount, and flange mount.
Product Page ... |
|
| HJSAW
SIngle Acting Push. Dual cylinder is constructed from two cylinders connected back to back. Wide range of bore sizes 1/2" to 2". Unique body allows sensor switches to be mouted on 3 different sides when magnet type is required. Four different sensor switches available including hall effect or reed types, and indicator light (LED). Other options include bumpers, viton seals, male rod thread or no rod thread, foot mount, and flange mount.
Product Page ... |
|
| HJTA
Wide range of bore sizes 1/2" to 2". Unique body allows sensor switches to be mouted on 3 different sides when magnet type is required. Four different sensor switches available including hall effect or reed types, and indicator light (LED). Other options include bumpers, viton seals, male rod thread or no rod thread, foot mount, and flange mount.
Product Page ... |
|
| HJTAW
SIngle Acting Pull. Dual cylinder is constructed from two cylinders connected back to back. Wide range of bore sizes 1/2" to 2". Unique body allows sensor switches to be mouted on 3 different sides when magnet type is required. Four different sensor switches available including hall effect or reed types, and indicator light (LED). Other options include bumpers, viton seals, male rod thread or no rod thread, foot mount, and flange mount.
Product Page ... |
|
| -- Electric Actuators -- |
 | EWHRT
Table type rotary actuator is more compact for easier use.
Product Page ... |
|
| -- Guided Block Cylinders -- |
 | HSGDA DXF FILES
Humphrey Guided Block Cylinders are heavy duty air cylinders with precision guide shafts that are integrated into a unique extruded aluminum body. Guided Block Cylinders provide rigid movement of substantial loads, plus they have the strength to withstand significant side loading. The rectangular design saves space and provides a wide selection of mounting, porting and sensor switch options. Both are available in 8 bore sizes with stokes of up to 8 inches in length. Hard chrome plated piston rods are standard on 12 to 25 mm bore models. Hard chrome plated hard steel piston rods are standard on 32 to 63 mm bore models.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
| HSGDA/HSGDAP PDF
Humphrey Guided Block Cylinders are heavy duty air cylinders with precision guide shafts that are integrated into a unique extruded aluminum body. Guided Block Cylinders provide rigid movement of substantial loads, plus they have the strength to withstand significant side loading. The rectangular design saves space and provides a wide selection of mounting, porting and sensor switch options. Both are available in 8 bore sizes with stokes of up to 8 inches in length. Hard chrome plated piston rods are standard on 12 to 25 mm bore models. Hard chrome plated hard steel piston rods are standard on 32 to 63 mm bore models.
Product Page ...
|
|
 | HSGDAP DXF FILES
Humphrey Guided Block Cylinders are heavy duty air cylinders with precision guide shafts that are integrated into a unique extruded aluminum body. Guided Block Cylinders provide rigid movement of substantial loads, plus they have the strength to withstand significant side loading. The rectangular design saves space and provides a wide selection of mounting, porting and sensor switch options. Both are available in 8 bore sizes with stokes of up to 8 inches in length. Hard chrome plated piston rods are standard on 12 to 25 mm bore models. Hard chrome plated hard steel piston rods are standard on 32 to 63 mm bore models.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | SGDA
Smaller size Guided Block Cylinders for stops and lifts. Bore sizes of 6, 8 or 10 mm. Three M3 port location options.
Product Page ... |
|
| -- Knock Cylinders -- |
 | HNSA
Humphrey Knock cylinders are insert-type cylinders that are designed for direct insertion into your finished product to become an unrecognizable, proprietary component of your equipment. NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
| -- Mini Bit Cylinder Series -- |
 | MBDA, MBSA
Miniature (4.5 to 10 mm bore) single and double acting actuators. Models available that comply with class 10 cleanroom requirements
Product Page ... |
|
| -- Mini Guide Actuator Series -- |
 | MGA Series
Miniature slide units, includes a clean room compatible model
Product Page ... |
|
| -- Mini Guided Actuator Series -- |
 | ZS
Slider with low profile offering linear guides and greater thrust from twin rods. Bore sizes from 6 to 25mm. Port size of M5 or 1/8 pipe.
Product Page ... |
|
| -- Miniature Cylinders -- |
 | PBDA
Miniature stainless steel tube cylinders in various configurations of single and double acting with various mounting and accessories.
Product Page ... |
|
| -- Multi-Mount Cylinders -- |
 | HBDADLS
Highly versatile and adaptable. Rectangular design provides mounting accuracy for precise installation. . Three millimeter (nominal inch equivalent) bore sizes 6 (1/4), 10 (3/8), 16 (5/8). Double acting, single acting push, and single acting pull. Mix and match mounting brackets. Non-rotating piston rod models are designed for high precision applications. Cylinder bumpers are standard and provide quiet operation and shock absorption. All models have integral magnets for operation of electronic sensor switches. Small size saves space and weight. No lubrication required.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | HBDADS
Highly versatile and adaptable. Rectangular design provides mounting accuracy for precise installation. . Three millimeter (nominal inch equivalent) bore sizes 6 (1/4), 10 (3/8), 16 (5/8). Double acting, single acting push, and single acting pull. Mix and match mounting brackets. Non-rotating piston rod models are designed for high precision applications. Cylinder bumpers are standard and provide quiet operation and shock absorption. All models have integral magnets for operation of electronic sensor switches. Small size saves space and weight. No lubrication required.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | HBDALS
Highly versatile and adaptable. Rectangular design provides mounting accuracy for precise installation. . Three millimeter (nominal inch equivalent) bore sizes 6 (1/4), 10 (3/8), 16 (5/8). Double acting, single acting push, and single acting pull. Mix and match mounting brackets. Non-rotating piston rod models are designed for high precision applications. Cylinder bumpers are standard and provide quiet operation and shock absorption. All models have integral magnets for operation of electronic sensor switches. Small size saves space and weight. No lubrication required. NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | HBDAS
Highly versatile and adaptable. Rectangular design provides mounting accuracy for precise installation. . Three millimeter (nominal inch equivalent) bore sizes 6 (1/4), 10 (3/8), 16 (5/8). Double acting, single acting push, and single acting pull. Mix and match mounting brackets. Non-rotating piston rod models are designed for high precision applications. Cylinder bumpers are standard and provide quiet operation and shock absorption. All models have integral magnets for operation of electronic sensor switches. Small size saves space and weight. No lubrication required.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | HBSALS
Highly versatile and adaptable. Rectangular design provides mounting accuracy for precise installation. . Three millimeter (nominal inch equivalent) bore sizes 6 (1/4), 10 (3/8), 16 (5/8). Double acting, single acting push, and single acting pull. Mix and match mounting brackets. Non-rotating piston rod models are designed for high precision applications. Cylinder bumpers are standard and provide quiet operation and shock absorption. All models have integral magnets for operation of electronic sensor switches. Small size saves space and weight. No lubrication required.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | HBSAS
Highly versatile and adaptable. Rectangular design provides mounting accuracy for precise installation. . Three millimeter (nominal inch equivalent) bore sizes 6 (1/4), 10 (3/8), 16 (5/8). Double acting, single acting push, and single acting pull. Mix and match mounting brackets. Non-rotating piston rod models are designed for high precision applications. Cylinder bumpers are standard and provide quiet operation and shock absorption. All models have integral magnets for operation of electronic sensor switches. Small size saves space and weight. No lubrication required. NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | HBTALS
Highly versatile and adaptable. Rectangular design provides mounting accuracy for precise installation. . Three millimeter (nominal inch equivalent) bore sizes 6 (1/4), 10 (3/8), 16 (5/8). Double acting, single acting push, and single acting pull. Mix and match mounting brackets. Non-rotating piston rod models are designed for high precision applications. Cylinder bumpers are standard and provide quiet operation and shock absorption. All models have integral magnets for operation of electronic sensor switches. Small size saves space and weight. No lubrication required.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | HBTAS
Highly versatile and adaptable. Rectangular design provides mounting accuracy for precise installation. . Three millimeter (nominal inch equivalent) bore sizes 6 (1/4), 10 (3/8), 16 (5/8). Double acting, single acting push, and single acting pull. Mix and match mounting brackets. Non-rotating piston rod models are designed for high precision applications. Cylinder bumpers are standard and provide quiet operation and shock absorption. All models have integral magnets for operation of electronic sensor switches. Small size saves space and weight. No lubrication required.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
| -- Pneumatic Grippers -- |
 | AFDPG
Flat type air hand with linear guides to increase accuracy. Double piston for greater grip force from 12 to 105N. Port size of M3 or M5.
Product Page ... |
|
 | HNHBD
Compact and light weight. Rugged. Ideal for factory automation pick-and-place applications. Handles parts weighing up to 2.5 lbs. Four millimeter (nominal inch equivalent) bore sizes 10 (3/8), 16 (5/8), 20 (3/4), and 25 (1). Double or single acting (normally open) in either angular or parallel type. Piston magnet is standard so gripper is ready for use with hall effect sensor switches with LEDs. No lubrication required for internal portion of gripper. Versatile mounting: rear axial, or two different sides provides easy installation. NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | HNHBR
Compact and light weight. Rugged. Ideal for factory automation pick-and-place applications. Handles parts weighing up to 2.5 lbs. Four millimeter (nominal inch equivalent) bore sizes 10 (3/8), 16 (5/8), 20 (3/4), and 25 (1). Double or single acting (normally open) in either angular or parallel type. Piston magnet is standard so gripper is ready for use with hall effect sensor switches with LEDs. No lubrication required for internal portion of gripper. Versatile mounting: rear axial, or two different sides provides easy installation.
Product Page ... |
|
 | WHDP
Wide type air hand is optimum for chucking and handling. Longer stroke with linear guides. Grip force from 24 to 132N. Port size is M5.
Product Page ... |
|
| -- Rodless Cylinders -- |
| HORV
Rodless Cylinders are lighter, shorter and thinner. The block type end cap allows for direct mounting without the need for mounting brackets. A flat piston shape achives an extremely thin profile.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | ORS
Slider type rodless cylinder with low height for thin equipment requirements. Bore sizes 10-40 mm with stroke lengths of 150 - 1000 mm. Port sizes: M5, 1/8 or 1/4 pipe size.
Product Page ... |
|
| -- Rotary Actuators -- |
 | HRAPS
Rotary actuator-piston type offers maximum space saving, easy piping. Rotation from 90 degrees toa full 360 degrees. Ultra compact sensor switch can be used. Double rack system offers no backlash and no leak construction. Slim, compact body. One end porting allows greater space saving. Double rod model available.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | RAN
Rotary actuator - vane type is compact, light weight with easy installation. Rotation from 90 to 275 degrees. Port sizes: M5 or 1/8 pipe size.
Product Page ... |
|
 | RAT
Rotary actuator - piston type is compact with precision using internal bearin. Rotation from 90 to 180 degrees. Port size is M5.
Product Page ... |
|
| -- Sensors -- |
| Block Cylinders
Humphrey sensor switches are two types. Hall effect sensor swithches are electronic switches with no moving parts. They operate only on low DC supply voltage (10 to 28 VDC). Reed sensor switches are electro-mechanical switches which will operate on either AC of DC voltages (5 to 28VDC or 115AC)
Product Page ... |
|
| Grippers
Humphrey sensor switches are two types. Hall effect sensor swithches are electronic switches with no moving parts. They operate only on low DC supply voltage (10 to 28 VDC). Reed sensor switches are electro-mechanical switches which will operate on either AC of DC voltages (5 to 28VDC or 115AC)
Product Page ... |
|
| Multi-Mount Cylinders
Humphrey sensor switches are two types. Hall effect sensor swithches are electronic switches with no moving parts. They operate only on low DC supply voltage (10 to 28 VDC). Reed sensor switches are electro-mechanical switches which will operate on either AC of DC voltages (5 to 28VDC or 115AC)
Product Page ... |
|
| Rotary Actuators
Humphrey sensor switches are two types. Hall effect sensor swithches are electronic switches with no moving parts. They operate only on low DC supply voltage (10 to 28 VDC). Reed sensor switches are electro-mechanical switches which will operate on either AC of DC voltages (5 to 28VDC or 115AC)
Product Page ... |
|
| Slide Actuators
Humphrey sensor switches are two types. Hall effect sensor swithches are electronic switches with no moving parts. They operate only on low DC supply voltage (10 to 28 VDC). Reed sensor switches are electro-mechanical switches which will operate on either AC of DC voltages (5 to 28VDC or 115AC)
Product Page ... |
|
| Stainless Steel Cylinders
Humphrey sensor switches are two types. Hall effect sensor swithches are electronic switches with no moving parts. They operate only on low DC supply voltage (10 to 28 VDC). Reed sensor switches are electro-mechanical switches which will operate on either AC of DC voltages (5 to 28VDC or 115AC)
Product Page ... |
|
| Twin Rod
Humphrey sensor switches are two types. Hall effect sensor swithches are electronic switches with no moving parts. They operate only on low DC supply voltage (10 to 28 VDC). Reed sensor switches are electro-mechanical switches which will operate on either AC of DC voltages (5 to 28VDC or 115AC)
Product Page ...
|
|
| Twinport Cylinders
Humphrey sensor switches are two types. Hall effect sensor swithches are electronic switches with no moving parts. They operate only on low DC supply voltage (10 to 28 VDC). Reed sensor switches are electro-mechanical switches which will operate on either AC of DC voltages (5 to 28VDC or 115AC)
Product Page ... |
|
| -- Slide Unit Actuators -- |
 | HSULS
Provides linear and rotary motion, either simultaneously or alternately. Simplify design--one actuator does the work previously required of a cylinder and rotary actuator. Fewer components required, saving space and cost. Optional End Keep feature locks piston rods in the event of pressure loss or failure, thereby preventing damage to equipment.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | HSUPS
Provides linear and rotary motion, either simultaneously or alternately. Simplify design--one actuator does the work previously required of a cylinder and rotary actuator. Fewer components required, saving space and cost. Optional End Keep feature locks piston rods in the event of pressure loss or failure, thereby preventing damage to equipment.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | HSUTS
Provides linear and rotary motion, either simultaneously or alternately. Simplify design--one actuator does the work previously required of a cylinder and rotary actuator. Fewer components required, saving space and cost. Optional End Keep feature locks piston rods in the event of pressure loss or failure, thereby preventing damage to equipment.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
| -- Stainless Steel Cylinders -- |
 | BFD
Ideal for low cost automation solutions. The Humphrey Air Cylinder features include: Barrel, Piston Rod, Piston, Seals, and Rod Bushing. Requires air pressure to extend and retract rod.
Product Page ... |
|
 | BFS
Ideal for low cost automation solutions. The Humphrey Air Cylinder features include: Barrel, Piston Rod, Piston, Seals, and Rod Bushing. Economical--requires air pressure only to extend rod.
Product Page ... |
|
 | BFSR
Ideal for low cost automation solutions. The Humphrey Air Cylinder features include: Barrel, Piston Rod, Piston, Seals, and Rod Bushing. Economical--requires air pressure only to retract rod.
Product Page ... |
|
| C
Axial piping (both ends)
Product Page ... |
|
| CP
Nose mount (one end)
Product Page ... |
|
| CPP
Nose mount (both ends)
Product Page ... |
|
 | D
Ideal for low cost automation solutions. The Humphrey Air Cylinder features include: Barrel, Piston Rod, Piston, Seals, and Rod Bushing. Requires air pressure to extend and retract rod.
Product Page ... |
|
 | D2EY
Ideal for low cost automation solutions. The Humphrey Air Cylinder features include: Barrel, Piston Rod, Piston, Seals, and Rod Bushing. Requires air pressure to extend and retract rod.
Product Page ... |
|
 | DP
Ideal for low cost automation solutions. The Humphrey Air Cylinder features include: Barrel, Piston Rod, Piston, Seals, and Rod Bushing. Requires air pressure to extend and retract rod.
Product Page ... |
|
| DX
Humphrey DX Deluxe Rod Cylinders turn cylinders previously categorizaed as "specials" into standard, make-to-order products. The Deluxe Rod ordering system provides a fast, easy, cost effective way to produce cylinders for customers who have requirements for non-cataloged rod features and/or dimensions.
Product Page ... |
|
 | S
Ideal for low cost automation solutions. The Humphrey Air Cylinder features include: Barrel, Piston Rod, Piston, Seals, and Rod Bushing. Economical--requires air pressure only to extend rod.
Product Page ... |
|
 | SH
Ideal for low cost automation solutions. The Humphrey Air Cylinder features include: Barrel, Piston Rod, Piston, Seals, and Rod Bushing. Economical--requires air pressure only to extend rod.
Product Page ... |
|
 | SHP
Ideal for low cost automation solutions. The Humphrey Air Cylinder features include: Barrel, Piston Rod, Piston, Seals, and Rod Bushing. Economical--requires air pressure only to extend rod.
Product Page ... |
|
 | SP
Ideal for low cost automation solutions. The Humphrey Air Cylinder features include: Barrel, Piston Rod, Piston, Seals, and Rod Bushing. Economical--requires air pressure only to extend rod.
Product Page ... |
|
 | SR
Ideal for low cost automation solutions. The Humphrey Air Cylinder features include: Barrel, Piston Rod, Piston, Seals, and Rod Bushing. Economical--requires air pressure only to retract rod.
Product Page ... |
|
 | SRP
Ideal for low cost automation solutions. The Humphrey Air Cylinder features include: Barrel, Piston Rod, Piston, Seals, and Rod Bushing. Economical--requires air pressure only to retract rod.
Product Page ... |
|
| -- Swing Cylinders -- |
 | HSDA
Provides linear and rotary motion, either simultaneously or alternately. SImplifies design; one actuator does the work previously required by a cylinder and rotary actuator. Two bore sizes to choose from: 1-inch (25mm) and 1 1/2-inch (40mm). FOur different swing angles: 45 degrees, 90 degrees, 135 degrees and 180 degrees. Sensor switches can be applied to detect both linear and rotary functions.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
| -- Twin Port Cylinders -- |
 | HTWD
Single plane piping simplifies plumbing, eliminates dead space associated with conventional double acting cylinders. Five millimeter (nominal inch equivalent) bore sizes 16 (5/8), 20 (3/4), 25 (1), 32 (1 1/4), and 40 (1 1/2). Innovative dual barrel design. Double acting with both ports in one location. Rotate cylinder every 90 degrees to position ports as desired. Port connections include rod end porting with nose or block mount, and head end porting. Piston magnet included for ready use with sensor switches. Standard piston bumpers reduce shock and operation noise. Requires no lubrication.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
| -- Twin Rod Cylinders -- |
 | HTBDA
Double acting. Seven millimeter (nominal inch equivalent) bore sizes 10 (3/8), 16 (5/8), 20 (3/4), 25 (1), 32 (1 1/4). Twice the thrust of conventional single rod cylinders. Rectangular body mounts directly to equipment for rigid, secure mounting within a minimum of space. Rotation proof, no rod guides needed. Optional sensor switches have LEDs (most models). Requires no lubrication.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ...
|
|
 | HTBDAK
Double acting. Seven millimeter (nominal inch equivalent) bore sizes 16 (5/8), 20 (3/4), 25 (1). Twice the thrust of conventional single rod cylinders. Rectangular body mounts directly to equipment for rigid, secure mounting within a minimum of space. Rotation proof, no rod guides needed. Optional sensor switches have LEDs (most models). Requires no lubricationNOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ...
|
|
 | HTBDAM
Double acting. Seven millimeter (nominal inch equivalent) bore sizes 10 (3/8), 16 (5/8), 20 (3/4), 25 (1), 32 (1 1/4). Twice the thrust of conventional single rod cylinders. Rectangular body mounts directly to equipment for rigid, secure mounting within a minimum of space. Rotation proof, no rod guides needed. Optional sensor switches have LEDs (most models). Requires no lubricationNOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ...
|
|
 | HTBSA
Double acting. Seven millimeter (nominal inch equivalent) bore sizes 10 (3/8), 16 (5/8), 20 (3/4), 25 (1). Twice the thrust of conventional single rod cylinders. Rectangular body mounts directly to equipment for rigid, secure mounting within a minimum of space. Rotation proof, no rod guides needed. Optional sensor switches have LEDs (most models). Requires no lubricationNOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ...
|
|
 | HTDA
Double acting. Seven millimeter (nominal inch equivalent) bore sizes 6 (1/4). Twice the thrust of conventional single rod cylinders. Rectangular body mounts directly to equipment for rigid, secure mounting within a minimum of space. Rotation proof, no rod guides needed. Optional sensor switches have LEDs (most models). Requires no lubrication.NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ...
|
|
| -- CATALOGS -- |
| Accessories
Product Page ... |
|
| FM Solid Manifold
Product Page ... |
|
| -- Air Piloted Valves -- |
 | 125 Series
.125 -inch (3.2mm) orifice, 2- and 3-way valves of diaphragm-poppet design.
Product Page ... |
|
 | 250 Series
.250-inch (6.4mm) orifice, 2- and 3-way valves of diaphragm-poppet design.
Product Page ... |
|
 | 42 & M42
.250-inch (6.4mm) orifice 4-way valves feature Delrin sleeve construction to reduce friction for smooth performance and long service life.
Product Page ... |
|
 | 500 Series
.500-inch (12.7mm) orifice, 2- and 3-way valves of diaphragm-poppet design.
Product Page ... |
|
 | 501 Series
.500-inch (12.7mm) orifice, 2- ,3-, and 4-way valves of piston-poppet design.
Product Page ... |
|
 | 590 Series
.625-inch (15.9mm) orifice, 2- and 3-way valves of diaphragm-poppet design.
Product Page ... |
|
 | H110 Series
Single and double air-piloted 4-way spool valves with 1/8-inch ports
Product Page ... |
|
 | H180 Series
Single and double air-piloted 4-way spool valves with 1/4-inch ports
Product Page ... |
|
 | Super Quick Exhaust
A variety of sizes to meet challenging quick exhaust applications.
Product Page ... |
|
| -- Air and Vacuum Piloted Valves -- |
 | Cartridge Insert Valves
Humphrey cartridge insert valves are 2-way or 3-way valves specifically designed for incorporation into OEM products that become a proprietary and unrecognizable component of these products. Cartridge insert valves are available in 0.125-inch, 0.250-inch, and 0.500-inch orifice sizes for manual, mechanical, or air pilot actuation, and for normally closed or normally open functions in pressure ranges from 0-125 psig.
Product Page ... |
|
 | Glue Valves
Humphrey glue valves are 2-way, double air-piloted valves with a full 0.125-inch or 0.250-inch orifice. Constructed with only two flexing diaphragms and no sliding seals. Humphrey glue valves are self-cleaning. There are no pockets to collect glue. They feature positive "open" and "close" that prevents dripping because the volume under the top solid diaphragm draws the glue back into the valve upon closing.
Product Page ... |
|
 | Humphrey Air and Vacuum Piloted Vacuum Valves
Humphrey air and vacuum piloted valves are 2-position, 2-way or 3-way, normally closed only valves which require no lubrication, withstand contamination, and will not stick. They have no sliding seals subject to cutting and no metal seals subject to scratching. Full orifice throughout.
Product Page ... |
|
| -- Manual/Mechanical Air Valves -- |
 | Manual/Mechanical
Humphrey mechanical valves are simple, reliable, compact, 2-way and 3-way valves providing high flow rates (full orifice throughout) and requiring no lubrication. A 125 Series valve has a full 0.125-inch orifice; a 250 Series valve has a full 0.250-inch orifice, providing nearly three times the flow of the 125 Series.
Product Page ... |
|
| Seals Repair Kits and Parts
Humphrey Seals Repair Kits and Parts are available to repair many Humphrey valves. Kits contain parts and detailed instructions and are sealed in plastic bags for cleanliness and protection. Available through Humphrey valve representatives worldwide.Seals repair kits may not be available for every model. However these models may be repaired with individual parts ordered from the parts list. Consult factory regarding specific models.
Product Page ... |
|
| -- Proportional Valves -- |
 | KFPV050 Series
The Proportional Control Valves KFPV050 Series was developed on the basic concepts of high precision, efficiency, and simplicity.
Product Page ... |
|
| -- Solenoid Valves -- |
| 062/125 Tyna-Myte
Direct-operating 2-3-and 4 way, two-position, spring-return air valves, featureing the unique Humphrey Electropact single or double solenoid operator.
Product Page ... |
|
 | 125E1LW
Direct acting, single solenoidTwo position, 3-, 4-way Media: Air, inert gas or vacuum Pressure range: 0-125 psig (0~8.5 bar) vacuum 0-28" Hg Mounts in line, on mounting base, on sub-base or manifold mount Voltages: 12VDC, 24VDC, 24VAC, 100VAC
Product Page ... |
|
| 250 Electric
Double diaphragm poppet design, "no stick" valves
Product Page ... |
|
 | 310/410
Direct acting, single solenoidTwo position, 2 way 3 way 4 way Media: Air, inert gas or vacuum Pressure range: 0-125 psig (0~8.5 bar) vacuum 0-28" Hg Mounts in line, on mounting base, on sub-base or manifold mount Voltages: 12VDC, 24VDC
Product Page ... |
|
 | 315 Series Valves
Direct-acting solenoid valve with high flow rate -- .42Cv. Available in 1/8" NPT ports in multi-purpose 3 way configurations.
Product Page ... |
|
| 31E1/41E1
Series of direct-operating 3 way and 4 way single solenoid, 2-position, spring-return valves that provide quiet operation with no AC hum.
Product Page ... |
|
| 320/420 Series
3 or 4 way, 2-position spring return, direct acting, single solenoid,continuous duty coil.
Product Page ... |
|
 | 401/402
Direct acting, single or double micro solenoid (10mm)Two position, 4-way, NC/NO Media: Air, vacuum, or inert gas Pressure range: 28" Hg.- 125 psig (8.5 bar) Mounts in line, on subbase, or manifold mount Voltages: 5VDC, 12VDC, 24VDC, 24VAC, 100VAC, 120VAC, 200VAC, 240VAC
Product Page ... |
|
 | 410M Series Manifold
Product Page ... |
|
| 42E1 Tac Electric
TAC electric air valves are a series of rugged, compact, 2-position, 4-way 5-port valves having a common inlet and separate exhausts.
Product Page ... |
|
| 500/501/590 Electric Series
Double diaphragm poppet design, "no-stick" valves.
Product Page ... |
|
 | 555 Series
The Humphrey Series 555, 565 and 575 Electro-pneumatic Valve and Sensor Systems are complete valve/wiring/plumbing solutions designed exclusively for pneumatically actuated accumulation-type conveyors. Use with common photo-electric sensors to electrically operate pneumatic actuators controlling drive belts and carrier rollers. The 555, 565 and 575 replace sensor rollers and mechanically operated pneumatic systems with electronic controls and intelligence.
Product Page ... |
|
| B3E1
Direct acting, single solenoidTwo position, 2-, 3-way Media: Air or inert gas Pressure range: 0-100 psig (0-7 bar) Mounts in line, on mounting base, or manifold mount Voltages 1.5, 5, 12, 24VDC 24, 120, 240VAC
Product Page ... |
|
| GEN2 Accumulation Conveyor Control
Introducing "state of the art" technology in the control of zero pressure accumulation conveyors. With GEN2, we can improve the performance of your conveyor, while reducing your total costs.GEN2 features include: 9 Mode Settings - Field Programmable, "Commands" & "Reporting", Adjustable Time Delays, Spill Resistant, LED Diagnostics, Fault Recovery, Snap-In Mounting, Push-On Connections, & Bi-Directional.
Product Page ... |
|
| H010
Direct acting, single micro solenoid (10mm wide)Two position, 2- or 3-way Normally closed Media: Air, inert gas, or vacuum Pressure range: 28" Hg.-100 psig (0-7 bar) Mounts in line, on mounting base, or manifold mount Voltages: 5VDC, 6VDC, 12VDC, 24VDC NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
| H030 Series
Small size, light weigth, high flow, low power, 2-3 and 4 way NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
| H040
Indirect Acting IN-Line NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | H041
Indirect acting, single micro solenoid (10mm wide)Two position, 3-way Normally closed or normally open Media: Air or inert gas Pressure range: 28.5-100 psig (2-7 bar) Mounts in line, on subbase or manifold Voltages: 5VDC, 6VDC, 12VDC, 24VDC NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
| H110
2-3 or 4 way single unit valvesNOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | H180 Series
Indirect acting, single and double solenoidTwo and three position, 2-, 3-way Media: Air or inert gas Pressure range: 20-100 psig (1.5-7 bar) Mounts in line, on sub-base, or manifold mount Voltages 12VDC, 24VDC, 24VAC, 120VAC, 240VAC NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | H240
Indirect acting, internally piloted, single or double solenoidTwo and three position, 4-way Media: Air or inert gas Pressure range: 25-100 psig (1.7-7 bar) Mounts in line, on mounting base, on sub-base, or manifold mount Voltages 12VDC, 24VDC, 24VAC, 120VAC, 240VAC NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | HEA/HEB and HJC/HJE Series
A small, easy-to-use, simple configuration! Responsive to varied needs and professional control, while achieving still lower power consumption levels and quick response!
Product Page ... |
|
 | HG010
Direct acting, single micro solenoid (10mm wide)Two position, 2- or 3-way Normally Closed Media: Air or inert gas Pressure range: 0-100 psig Mounts in line, on subbase or manifold Power Consumption: 1W standard or optional .5W Voltages: 5VDC, 6VDC, 12VDC, 24VDC, 120VAC, 240VAC NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | HGF
Indirect acting, single or double micro solenoid (10mm, 15mm or 18mm wide)Two or three position, 4-way Media: air, inert gases or vacuum Pressure range: 0-100 psig Mounts in line, on subbase or manifold Voltages: 5VDC, 12VDC, 24VDC, 120VAC, 240VAC NOTE: DXF files are in Metric. For NPT ports use "H" prefix.
Product Page ... |
|
 | HJA Series
A new generation of miniature, low power solenoid valves, with a 10mm width. Based on a compact simplified manifold design, the offering is highlighted by ultra low power consumption solenoids, tandem 3-port valves, wire saving, back pressure prevention and individual air supply spacer options.
Product Page ... |
|
| HK5
Direct acting, 2-, 3 wayMulti-purpose function Cv .035 & .05 versions Max 3.0 SCFM (85 Lpm) Media; air, vacuum, inert gas Consult factory for other gas and/or liquid media
Product Page ... |
|
 | HKL5 Liquid Valve Series
The new HKL5 valve is designed to meet the requirements of in vitro diagnostic devices, analytical instruments and other applications requiring fluid control.
Product Page ... |
|
| M420
1/4" Dimensions
Product Page ... |
|
 | MA710
2 way. Single solenoid valves with spring return mounted in group of four on manifold. For neutral liquids, gases and vapors.
Product Page ... |
|
 | PI300
Bi-stable valve maintaining position with momentary signal to single solenoid. For neutral liquids, gases and vapors. Small orifice with low current consumption in DC voltages.
Product Page ... |
|
 | Spider Series
7, 15 and 21 mm Cartridge Type Solenoid Valves
Product Page ... |
|
| -- TAC Air Valves -- |
 | TAC
A highly versatile line of air valves operated by pilot or mechanical operators or manually by their push-buttons. Each push-button's shoulder bottoms-out on the valve body to prevent overstroke and valve damage. Operators adapt directly to the threaded button end. Port sizes are as follows: TAC, #10-32; TAC2, 1/8-inch; TAC3 , 1/4-inch
Product Page ... |
|
| TAC Accessories
A highly versatile line of air valves operated by pilot or mechanical operators or manually by their push-buttons. Each push-button's shoulder bottoms-out on the valve body to prevent overstroke and valve damage. Operators adapt directly to the threaded button end. Port sizes are as follows: TAC, #10-32; TAC2, 1/8-inch; TAC3 , 1/4-inch
Product Page ... |
|
